You Are Here:Home >> Product>>Electromechanical Universal Testing Machine > >>Economical Electromechanical Universal Testing Machine

Economical Electromechanical Universal Testing Machine

Model: WDW-E series

Description:

WDW series computer control electromechanical testing machine for local components is designed according to ASTM, ISO, DIN, EN, JIS, GOST, GB standards etc.. It is computer-controlled and precision. Our electromechanical testing machine for local components is widely suitable for metallic and nonmetallic materials for tension, compression, bending, and shearing test.The electromechanical testing machine for local components features as high precision, high stability and high reliability. Graph, test result display, data processing and printing can be done easily by its PC system and printer. Completed with modulus for metal, spring, textile, rubber, plastic and other material test, our electromechanical testing machine for local components is widely used in manufacturers such as industry factories, research and development, test institutes and training centers etc.
WDW-E economical series of electromechanical testing machine for local components adopt rigid load frames, accurate load weighting system, advanced PCIE measuring & control system and intuitive modular application software. Configured with wide range of accessories for applications, the materials testing systems can provide the best testing solutions for your individual application needs.
The economical series of electromechanical testing machine for local components are good at spring testing. The parameters are much better than other spring testing machines existing in the market.
WDW-E economical electromechanical testing machine for local components is an ideal equipment for lower budget project where not a less accuracy of testing results is needed. It equips with reasonable configurations of top local components (load cell, servo motor & driver, encoder, standard screws), which can satisfy the ordinary testing requirements.

Tel: +86-531-86510531Ext.9

Fax: +86-531-86510535

Email:sales@testingequipmentie.com

Inquiry Now

Applied Standards
● Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221.
● Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846, EN 10002-4.
● Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1.
Load Frame
According to load capacity & test application, the load frames are available in single column, table and floor type to meet a variety of test applications.

Single column machine is more suitable for bio-medical, textiles, plastic film industries where load testing requires a lower capacity (below 5kN). Dual-column is the main choice of rubber, plastic, composites, metal alloy, and fasteners, whose specimen needs a wide test area, middle strength, and high capacity.

The frames all take human factors into considerations in the design to ensure the safety, reduce operators’ fatigue and provide the highest flexibility. The extremely robust cross-head guidance is incorporated in all frame designs so as to provide the highest stiffness of lateral cross-heads.

Load cell is with high accuracy and interchangeable for all frames. Each frame is allowed to operate in full capacity.

Safety features:

The electromechanical testing machine for local components stops automatically when the change in the test force exceeds a specified value during operation.

Large space in the working area:

The insides of columns provide wide space for the operator.

Over-stroke limiter:

The range of the cross-head movement is mechanically limited.

Comfortable working area:

The wide legroom under the load unit provides a comfortable working area for attaching and removing jigs.
Specifications
Model WDW-S1E/2E/5E WDW-1/2/5/10/20E WDW-50/100E
Max. load kN 1/2/5 1/2/5/10/20 50/100
kgf 100/200/500 100/200/500/1.000/2.000 5.000/10.000
Load measuring range 2%~100% of F.S
Load accuracy ±1% of the reading
Deformation measuring range 2%~100% of F.S
Deformation accuracy ±1% of the reading
Position resolution 0.001mm
Position accuracy 1%
Vertical test space (mm) 910 1270 1350
Total crosshead travel (mm) 800 1220 1300
Column spacing (mm) 150 400 570
Max. tensile space (mm) 910 750 700
Max. compression space (mm) 865 1080 1150
Tensile jaw for round specimen(mm) / 1 Φ4~Φ14 Φ4~Φ20
Tensile jaw for flat specimen (mm) 0~8mm 0-14 0-21
Width x height of jaw (mm)
40 x 50 35x55 40x55
Compression platen diameter (mm) Φ50 Φ100
Bending fixture span(mm) / 2 10-300 20-400
Length of bending roller (mm) / 100
Diameter of bending roller (mm) / 10 20
of bending supporter (mm) / 50 90
Frame axial stiffness (kN/mm) 8 30 250
Power supply 1 phase, 220V/110V, 50Hz/60Hz
Power (kW) 0.4 1 1.5
Dimension (mm) 385x550x1415 700×540×1680 700×540×1820
Weight (kg) 55 120 210
Shipping dimension 900x500x1600 1150 x 810 x 2285 1150 x 810 x 2485

Note:

1. Single column machine equips with screw action parallel grip for flat specimens.
2. Single column machine isn’t configured with bending fixture as standard, it can be specially offered.
3. Appearance and specifications are subject to change without advance notice.
4. Equipment of other dimensions (extra height & extra width) & capacities can be offered in accordance to the necessity of customers.
5. The economic series electromechanical UTM are ideal for spring testing. Model shall be WDW-T***E when ordering;
CMT Series

CMT Series Single Screw Electromechanical Universal Testing Machine

Application

The CMT series single screw testing machine is designed for mechanical property test mainly on metal materials, cement, asphalt, and bitumen etc. A variety of fixtures can be offered to do compression, bending and shearing test as well. This series of single screw testing machine is suitable for the applications in quality inspection, research, metallurgy, rubber & plastics, and knitting materials, and widely used in many fields such as industry factories, mineral enterprise and high schools.

Specifications

Max. Load (KN) 5/10/20 50/100/200
Measuring Range 2%~100%
Load Accuracy ±1% of the reading
Load Resolution 1/100000
Position Resolution (mm) 0.01mm
Displacement Accuracy 1%
Load Speed (mm/min) 0.01-200
Speed Accuracy ±1%
Max. Tensile Space 800 800
Column Spacing (mm) 420 600
Dimension (mm) 600 × 450 × 1800 800 × 700 × 2150
Weight (kg) 200 300
Power Supply 1 phase, 220V/110V, 50Hz/60Hz 3 phases, 380V/220V, 50Hz/60H
Power (kW) 0.4/0.75 1.3/2/3
WDW-L Series

WDW-L Series Electric Vertical Test Stand




Application

WDW-L series Electric Vertical Test Stand is a tensile compressive test stand especially designed to match push-pull force gauge. This series pf electric vertical test stand has good stability, wide application range and is convenient to use. The electric vertical test stand has stepless speed-adjusting uniform motion, digital display of the testing speed and converting mode between manual and automatic operation. The vertical test stand is specialized for tension/compression test, insertion/withdraw test, fatigue test and fracture test.

Specification

Model WDW-L0.5 WDW-L1 WDW-L2 WDW-L5 WDW-L10 WDW-L20
Max. Load (kN) 0.5 1 2 5 10 20
Load Accuracy <1%
Load Speed (mm/min) 50-245 (Max Load: 200N); 250-500 (Max Load: 500N) 50-245 (Max load: 500N); 250-500 (Max Load: 1000N) 50-500 30-240 30-120 30-120;
Stroke (mm) 250 520 600 200 200 200
Dimension L × W × H(mm) 430 × 245 × 570 410 × 270 × 970 465 × 310 × 1180 410 × 260 × 1030 410 × 260 × 1030 410 × 260 × 1030
Weight (kg) 24 32 52 55 60 65

Applied with (purchase additionally):

1. SN, SH/SP (Sensor Inside) push pull force gauge




SN- dial gauge

SH- digital

SP- digital with curve

2. Various clamps (customer option).

Download
Video