Common Non-Metallic Pendulum Impact Testing Machine

  • 1. Plastic Materials Pendulum Impact Tester – Charpy, Izod, Tensile.

     ISO 179, ISO180

    2. Plastic Materials Drop Weight Impact Tester

    ISO 6603, 7765, 3127, 8256; ASTM D3763, D4272, D5628, D2444, 7136, 7192

    3.  Impact tests on non-metallic materials-Instrumented ISO179-2 


  • Instrumented Impact Testing System

    They can be equipped with high precision instrumented strain-gauged hammer edge & high-speed data acquisition system. This instrumented test system can measure the force of a test specimen during an impact event. Then, the instrumented test data can be used to calculate the energy absorbed by the test specimen. In addition, the crack initiation and arrest loads can be used in fracture mechanical models 


    Features

    The instrumented system is very accurate and versatile.

    1. motorized hammer lift 

    2. pneumatic hammer release， 

    3. touch screen 

    4. load cell with instrumented system 

    5. Hammer angle can be set freely

  • Three display types are available: Analog dial type, Digital display type & PC type

    Especially for PC display, more functions are available like auto clear zero, pneumatic hammer releasing (optional) and motorized hammer lifting (optional), energy compensation and pendulum cycle calibration make the testing data more accurate, the result can be displayed, stored and printed out.

  • Span of the Charpy Anvil: 40mm, 60mm, 70mm & 95mm
    Pre-elevation Angle: 160°


    ModelTypeDisplayEnergy(J)Impact velocity (m/s)
    JB-I 2.75IzodDial1, 2.753.5
    JB-I 5.51, 2.75, 5.53.5
    JB-I 222.5, 11, 223.5
    JB-I 2.75DIzodDigital1, 2.753.5
    JB-I 5.5D1, 2.75, 5.53.5
    JB-I 22D5.5, 11, 223.5
    JB-5CharpyDial1, 2, 4, 52.9
    JB-257.5, 15, 253.8
    JB-25Z1, 2, 4, 5/7.5, 15, 252.9/3.8
    JB-507.5, 15, 25, 503.8
    JB-5DCharpyDigital1, 2, 4, 52.9
    JB-25D7.5, 15, 253.8
    JB-25ZD1, 2, 4, 5/7.5, 15, 252.9/3.8
    JB-50D7.5, 15, 25, 503.8
    JB-IC5IzodDial1, 2.753.5
    Charpy1, 2, 4, 52.9
    JB-IC2522IzodDial5.5,11, 223.5
    Charpy7.5, 15, 25,3.8
    JB-IC25(D)IzodDial (Digital)1, 2.75, 5.5, 11, 223.5
    Charpy1, 2, 4, 5/7.5, 15, 253.8
    JB-50Z(D)IzodDial (Digital)5.5,11, 223.5
    Charpy1, 2, 4, 5/7.5, 15, 25, 502.9/3.8
    JB-IT50(D)IzodDial (Digital)1, 2.75, 5.5, 11, 223.5
    Charpy1, 2, 4, 5/7.5, 15, 25, 502.9/3.8
    Tensile Impact153.8
    Dimension (mm)500 x400 x755
    Dimension with safety shield (mm)1070 x400 x1240
    Dimension with customized safety shield (mm)1200x545x 1200
    Weight (kg)130/250 (with customized servo motor driven and pneumatic release unit)


    Note:

    The models above can be all upgraded to computer type by customer’s requirement.


Model: JB-(C/D)
Description:
JB-(C/D) series non-metallic materials pendulum impact testing machine is to determine the impact toughness of plastic, glass steel, plastic pipe, strong nylon, china, clay rock and anti-electric materials. It can do Charpy, Izod, tensile impact, Charpy & Izod, Charpy & Izod & tensile impact test by different anvils and pendulums with the standards of ISO179/180, ASTM D256, JB8761 and ISO 9854 etc. Pendulum can carry out the full range of impact tests. A complete range of fully interchangeable hammers and vises allow the operator to perform Charpy, Izod and tensile impact test at different impact velocities and energies.